No Cables, Clips, or Bars to Grip! No Grommets, Wrinkles, Tracks or Rips!
A wrinkle-free breakthrough banner frame system for installation of fabric graphics for billboards, banners, walls-capes, buildings and on-premise signage.
We are offering the full system, including the banner springs system and the outside frame. If you want to 'go naked' and skip the outside frame, call us for pricing!
Like a trampoline, our SignSpring generates continuous spring tension that is distributed evenly around the perimeter of the fabric graphic.
Simply install the BannerSprings at 1 foot intervals, pulling the spring tips through the vinyl. The pressure is even and infinite, providing a tight, wrinkle-free, sag-free appearance, whether your display period is 5 weeks or 5 years.
Easy Installation & change outs. Flawless, wrinkle free appearance. Durable & proven on large wallscapes & billboards. Replaces grommets & bungees; No tear-thru or rips.
Our SignSpring provides a durable, flawless surface with easy change-outs.
Watch the Installation Video, so see how easy they are to use: https://www.youtube.com/watch?v=W9d5RgxYG1Q
Banner Frame Production Guidelines:|
Step 1: Determine Banner Size and mark dimension perimeter on install surface.
Step 2: Install base channel 1.5”around perimeter.
Step 3: Install Banner by pulling BannerSpring tips into pre marked banner holes (see banner prep instructions).
Step 4: Snap on BannerFrame Cover Sections, Seam Covers and Corner Caps over Base channel. Light screws as needed.
Step 1: Mark the Mark-line Print or sketch a thin line around the entire banner perimeter, ¾” inside the banner edge.
Step 2: Mark holes on the 4 Sides* BannerFrame 4’ sections are either End-Sections or Middle-Sections. End Sections come pre-loaded with (5) springs. Middle Sections come pre-loaded with (4) springs. For either section type, Mark and punch 1/8” holes along the Mark-line (3/4” in from banner edge) using the correlating spacing for each section.
4' End Section:
4' Middle Section:
Substrate: Lind SignSpring Group suggests 7 oz. for vinyl for most applications. However, SignSpring performs well on heavier vinyl along with mesh, backlit, PE and most fabric graphic substrates.
Finishing: For best results, edges should be stitched, hemmed, or welded to avoid edge-curl. Do not use grommets.
Printing: Artwork and Final printing should include a mark-line bordering the entire graphic, ¾” inside the banner edge. The holes may also be marked or inserted as part of the printing process. If using BannerFrame cover sections, remember that approximately 3” of vinyl perimeter will be covered by BannerFrame Cover. As such, do not print AD copy within 5” of edge.
Lind SignSpring Group provides graphic fulfillment that includes pre-markings and protrusions to assure efficient installation and flawless results.